1000 Series Disc Harrows

Versatile, Reliable, Accurate

The quality and efficiency of the Challenger 1000 Series has been proven over many years, and the company’s obsession with constant improvement means these disc harrows are ideally suited to today’s farming practices. 

1000 Series Disc Harrows

1435K - 3 Section Flex - Disc Harrows

The 1435K range is designed for primary, secondary and incorporation of fertiliser/tillage applications.

Available in seven working widths with an average Kg/Disc of  91kg.

The 1435K is only available in the Russian market.

Top Features:

  • Three section frame
  • Heavy duty disc gangs and frames for efficient penetration into soil and residues
  • ‘Walking’ Tandem axles for unparallel ground contour following
  • UHMW bearing systems eliminates need for greasing at all key wear points
  • C-Flex™ shock absorbing bearing hangers extend disc and spool service life
  • Re-Phasing lift hydraulics ensures frame is raised evenly
  • Triple lip sealed trunnion bearings for long life maintaining alignment and accuracy
  • Hydraulic leveler option – adjustment from tractor seat
  • Finishing attachments to suit all operating conditions
Model Working
Width (m)
Transport
width (m)
No of discs Disc
spacing (mm)
Est hp*
CH1435-21 6.4 4.00 58 222 150-210
CH1435-23 6.9 4.00 66 222 160-230
CH1435-26 7.9 4.00 74 222 180-260
CH1435-29 8.8 4.00 82 222 200-290
CH1435-30 9.10 5.38 86 222 210-300
CH1435-33 9.99 5.40 94 222 230-330
CH1435-36 10.18 5.40 102 222 250-360
CHECK WITH YOUR LOCAL DEALER FOR AVAILABILITY IN YOUR MARKET

*ACTUAL HP WILL DEPEND ON VARYING FACTORS SUCH AS SOIL, TERRAIN, MOISTURE AND OTHER OPERATING CONDITIONS.

1436 Series - 3 Section Flex Tandem - Disc Harrow

The 1436 range is designed for the arduous tasks of Primary & Secondary Cultivation, Incorporation of Residue/chemicals.
With an average Kg/Disc in the region of 100Kg, the 1436 is a top performer in almost any soil/residue condition.

Top Features:

  • Heavy Duty frame Construction
  • Heavy Duty Disc Gangs with C-Flex Hangers
  • 610 Ø x 5 mm Disc Blades
  • Walking tandem axles for unparalleled flotation and ground following
  • 20 Degree Front Gang Angle
  • Triple Sealed Trunnion Bearings
  • Maintenance Free Lift System
  • Hyd Levellng Option
  • Single Point Depth Control
  • Range of finishing attachment options
MODEL WORKING
WIDTH (M)
TRANSPORT
WIDTH (M)
NO OF DISCS Disc
Spacing (MM)
EST HP
CH1436-21 6,3 4,0 62 222 150-210
CH1436-24 7,2 4,0 70 222 160-240
CH1436-27 8,1 4,0 78 222 180-270
CH1436-29 8,7 4,0 86 222 200-290
CH1436-31 9,3 5,3 90 222 220-310
CH1436-33 9,9 5,3 98 222 240-330
CH1436-36 10,8 5,3 106 222 250-360
CHECK WITH YOUR LOCAL DEALER FOR AVAILABILITY IN YOUR MARKET

*ACTUAL HP WILL DEPEND ON VARYING FACTORS SUCH AS SOIL, TERRAIN, MOISTURE AND OTHER OPERATING CONDITIONS.

1544 - 4 Section Flex Tandem - Disc Harrows

The 1544 range is designed for primary, secondary and incorporation of chemical residue.
These harrows will ‘eat up’ the Hectares with capacities up to 15 Ha/hour. They have the necessary in-built strength to work the toughest of conditions with today's modern high horsepower tractors – when time is short and the fields are large – the 1544 is the right choice.

Top Features:

  • Independent four section flex frame follows undulating ground conditions
  • Walking’ Tandem wheels for ground contour following
  • UHMW high resistant used  materials eliminate the need for greasing
  • C-Flex™ shock absorbing bearings extend disc and spool service life
  • Re-Phasing lift hydraulics ensures frame is raised evenly
  • Triple lip sealed trunnion bearings for long life maintaining alignment and accuracy
  • Single point depth control
  • Hydraulic leveler option – adjustment from tractor seat
  • Finishing attachments to suit all operating conditions
Model Working
Width (m)
Transport
width (m)
No of discs Disc
spacing (mm)
Est hp
CH1544-42 13.00 6.80 122 222 300-420
CH1544-45 13.80 6.80 130 222 315-450

*ACTUAL HP WILL DEPEND ON VARYING FACTORS SUCH AS SOIL, TERRAIN, MOISTURE AND OTHER OPERATING CONDITIONS.

1550 - 5 Section Flex Tandem - Disc Harrows

The 1550 range is designed for primary, secondary and residue/chemical incorporation/land reclamation.
These harrows will ‘eat up’ the Hectares with capacities exceeding 15 Ha/hour.
Built for maximum productivity and efficiency the 1550 is the ideal choice for today's large scale power
They have the strength to work with modern high horsepower tractors – when time is short and the fields are large – the 1550 is the right choice.
Designed for Optimum productivity.

Top Features:

  • Patented DUPLEX wing hinges
  • Staggered overlap gangs
  • Heavy duty disc gangs and frames for efficient penetration into soil and residues
  • ‘Walking’ Tandem wheels for ground contour following
  • UHMW bearing systems eliminates need for greasing
  • C-Flex™ shock absorbing bearings extend disc and spool service life
  • Re-Phasing lift hydraulics ensures frame is raised evenly
  • Triple lip sealed trunnion bearings for long life maintaining alignment and accuracy
  • Hydraulic leveler option – adjustment from tractor seat
  • Finishing attachments to suit all operating conditions
Model Working
width (m)
Transport
width (m)
No of discs Disc
spacing (mm)
Est hp
CH1550-47 14.10 5.50 134 222 330-460
CH1550-50 15.20 5.50 142 222 350-490

*ACTUAL HP WILL DEPEND ON VARYING FACTORS SUCH AS SOIL, TERRAIN, MOISTURE AND OTHER OPERATING CONDITIONS.

1700 - Heavy Duty Offset Disc Harrows

The 1710 (Rigid Frame) and 1730 (Folding Frame) ranges are designed for primary and residue/chemical incorporation/land reclamation.

The CH1700 provide a heavy duty rugged design with one of the heaviest disc weights in the industry of around 200Kg/Disc, enabling to out-perform in the toughest ground and residue conditions.
Available to accommodate tractors of up 400 hp.

Top Features:

  • Heavy Duty frame design to withstand the stress of modern tillage
  • Rigid frame design
  • Choice of Rigid or Spring Cushion gangs
  • 711 or 762 mm disc diameter option
  • Large high load capacity tyres
  • Hardened steel scrapers
Model Working
width (m)
Transport
width (m)
No of discs Disc
spacing (mm)
Est hp
CH1710-10 3.40 3.80 25 280 150-200
CH1710-12 3.80 4.40 29 280 180-230
CH1710-14 4.40 4.60 33 280 210-265
CH1710-16 5.00 5.40 37 280 240-290
CH1710-18 5.50 6.0 41 280 270-300
CH1730-22 6.50 2.90 49 280 330-360
CH1730-24 7.10 2.90 53 280 360-390
CH1730-26 7.60 2.90 57 280 400+
CHECK WITH YOUR LOCAL DEALER FOR AVAILABILITY IN YOUR MARKET

*ACTUAL HP WILL DEPEND ON VARYING FACTORS SUCH AS SOIL, TERRAIN, MOISTURE AND OTHER OPERATING CONDITIONS.

1800 - Heavy Duty Tandem Disc Harrows

The 1810 (Rigid Frame) and 1830 (Folding Frame) Series offer exceptional performance for todays professional farmer that demands a heavy duty tandem for the toughest of conditions and residue.
The 1800 Series offers one of the heaviest weight per disc in the industry, of around 200Kg/Disc.
Horsepower requirement ranges from 175 to 650hp.

Top Features:

  • Heavy Duty frame design, cross braced and gusseted
  • Built to withstand the stresses of modern tillage
  • RIGID frame design
  • Choice of rigid or Spring Cushion gangs
  • 711 or 762 mm disc Ø option
  • Large capacity high load capacity tyres
  • Hardened steel scrapers
  • Hydraulically controlled levelling
Model Working
width (m)
Transport
width (m)
No of discs Disc
spacing (mm)
Est hp
CH1810-14 4.30 4.80 30 280 175-260
CH1810-16 4.80 5.40 34 280 192-290
CH1810-18 5.30 6.00 38 280 270-325
CH1830-22 6.90 4.20 50 280 275-415
CH1830-24 7.50 4.20 54 280 300-450
CH1830-26 8.00 4.50 58 280 320-480
CH1830-30 9.00 5.2 66 280 450-540
CH1830-34 10.10 4.80 74 280 510-600
CH1830-38 11.70 4.80 86 280 570-650

*ACTUAL HP WILL DEPEND ON VARYING FACTORS SUCH AS SOIL, TERRAIN, MOISTURE AND OTHER OPERATING CONDITIONS.

1710HD Heavy Duty Offset ‘Ploughing Harrow’

The 1710 HD Offset range is a true “Ploughing Harrow” designed primarily for the heavy task of land reclamation/construction work.
This machine has an industry leading weight per disc of over 400 kg and is the ideal tool for such applications as Road Construction, and bringing land back into production.
Suitable for tractors from 250 to 420hp.

Top Features:

  • Heavy Duty frame design, cross braced and gusseted
  • Built to withstand the stresses of modern tillage
  • Rigid frame design
  • 914mm disc diameter option
  • Large high load capacity tyres - 10 bolt centres
  • Hardened steel scrapers
  • Disc spacing 457mm
Model Working
width (m)
Transport
width (m)
No of discs Disc
spacing (mm)
Est hp
CH1710HD-10 3.60 3.90 16 457 250-270
CH1710HD-16 5.30 5.90 24 457 400-420

*ACTUAL HP WILL DEPEND ON VARYING FACTORS SUCH AS SOIL, TERRAIN, MOISTURE AND OTHER OPERATING CONDITIONS.

Find Your Dealer

Seeding & Tillage Logo


CH1000 26.68Mb  |

CH1710 HD Spec Sheet Mb  |

1000 Series Disc Harrows /

Close